iLuv i202 Manuel D’Utilisation

Ear Clip Headset w/ Bluetooth wireless technology                    V10M10_IM_EN_11082006 

www.i-Luv.com 

 

The i202 can be used with an audio device that is not designed to support Bluetooth 
wireless technology using the supplied wireless audio transmitter (dongle). In order to 
answer and place phone calls while using the dongle, it is important to pair the mobile 
phone first. After pairing the mobile phone according to the previously-listed instructions, 
follow these directions to set the pair the i202 with the dongle. 
 
1.  Set the i202 into pairing mode following instructions 1 and 2 on the previous page. 
 
2.  Press and hold the On/Off button on the dongle for 

approximately five (5) seconds. 

 
3.  Blue and red alternating lights will blink around the 

On/Off button indicating that the dongle is now in pairing 
mode.  

 

4.  Place the headset near the dongle when both are in pairing mode. 

 
 
 
5.  When the alternating red 

and blue blinking lights on 
both devices change to a 
blue blinking light ONLY, 
pairing is complete.  

 

6.  Plug the 3.5mm end of the dongle into the 

headphone jack of an audio device and enjoy 
music playback wirelessly through the i202 
stereo headphones. 

 
Note: Only the volume can be controlled on the 
i202 when using the dongle. All other functions 
(skip, stop, forward, etc.) must be controlled using 
the controls on the audio device itself.