Home Automation SIA CP-01 Manuel D’Utilisation
65
Flash For Alarm
You may enter one unit number that will flash On and Off continuously when the alarm is activated. This should be an outside
light to alert neighbors and police to your property if the alarm is activated.
The default Flash For Alarm is Unit 2. You may enter one number for the unit number you wish to have flash, or ' 0 ' for none.
Console 1-4 Audible Exit Delay
Consoles (and touchscreens) 1-4 can be configured to beep while the exit delay is in effect. During the last 10 seconds of the exit
delay, the audible indication will beep twice as fast to let you know that you must leave at once.
Press the 0 key to select “No” (this console will not beep during the exit delay) or the 1 key to select “Yes” (this console will beep
during the exit delay). After selecting, press the down-arrow key to change this option for the next console.
You may enter one unit number that will flash On and Off continuously when the alarm is activated. This should be an outside
light to alert neighbors and police to your property if the alarm is activated.
The default Flash For Alarm is Unit 2. You may enter one number for the unit number you wish to have flash, or ' 0 ' for none.
Console 1-4 Audible Exit Delay
Consoles (and touchscreens) 1-4 can be configured to beep while the exit delay is in effect. During the last 10 seconds of the exit
delay, the audible indication will beep twice as fast to let you know that you must leave at once.
Press the 0 key to select “No” (this console will not beep during the exit delay) or the 1 key to select “Yes” (this console will beep
during the exit delay). After selecting, press the down-arrow key to change this option for the next console.
CONSOLE 1 AUD EXT: 1
0=NO 1=YES
The default setting for Console 1-4 Audible Exit Delay is Yes.
House Code Format
The House Code can be configured to use the Standard (Preset Dim Command), Extended Code (Level Command), Lightolier's
Compose Mode, UPB (open transmission format), Lutron’s RadioRA transmission format, HAI Lighting (HLC), or CentraLite
transmission format.
HC 1 FORMAT: 5
HAI LIGHTING #=CHNG
HAI LIGHTING #=CHNG
To change format for the House Code, press the ' # ' key, and then use the arrow keys to scroll through the list of formats. Press
the ' # ' key to select the desired format
the ' # ' key to select the desired format
.
FORMAT NUMBER
DESCRIPTION
STANDARD
0
Preset Dim Command (X-10, X-10 Pro, Leviton, PCS, etc.)
EXTENDED
1
Extended Code Level Command (Leviton)
COMPOSE
2 Compose
Mode
(Lightolier's
Compose)
UPB
3 Universal
Powerline
Bus
(open
format)
RADIO
RA
4 Lutron
RadioRA
HAI
LIGHTING
5 HAI
Lighting
Control
(HLC)
CENTRALITE
6 CentraLite
Lighting
The default setting for HC 1 Format is 5 (HLC).
House Code All Off
This feature allows you to choose if the House Code will respond to the “All Off” command. Press the 0 key to select No and the
1 key to select Yes.
HC 1 ALL OFF: 1
0=NO 1=YES
The default setting for HC 1 All Off is Yes.