Country Home Products 6-TON Manuel D’Utilisation

Page de 34
 
 CALL 
TOLL 
FREE 
1-800-DR-OWNER         11
 
 
Unpacking and Assembling the DR 6 -TON ELECTRIC WOOD SPLITTER 
NOTE:
  
Read this Safety 
&
 Operating Instructions Manual before using your new DR 6 -TON ELECTRIC 
WOOD SPLITTER.  The wood splitter shipped from the factory fully assembled with the exception of 
the Wheels and the Operation Handle.  The following instructions will detail how to unpack and 
assemble the machine.
 
Tools and Parts Supplied: 
• 
6mm Hex Wrench 
• 
10 - 12mm Wrench 
• 
13 - 16mm Wrench 
• 
Operating Handle w/ 
Retaining Bolt and Washer 
• 
(2) 6mm Bolts 
• 
Extra Hydraulic Seal 
• 
(2) Wheels 
Additional Tool Required: 
• 
Knife 
 
 
STABILIZE THE SHIPPING CONTAINER ON A FLAT SURFACE BEFORE ATTEMPTING TO UNPACK AND 
ASSEMBLE THE MACHINE. 
 
1.  With the help of another person (the machine weighs 171 
pounds), carefully roll the shipping carton over onto its top. 
2.  Carefully cut the tape along the bottom seam of the shipping 
carton with a knife, open the carton, and remove the Wheel from 
the packing; setting it aside (Figure 2). 
3.  Now, carefully roll the shipping carton back onto its bottom 
(Figure 3) and lift the shipping carton off your new DR 6 -TON 
ELECTRIC WOOD SPLITTER (Figure 4).  The machine should 
now be resting on the Front Support Legs and the Rear Support. 
4.  Remove the second Wheel from the packing (setting it aside) 
and any remaining packing materials from the machine.  Do not 
discard your packaging material until you are fully satisfied with 
your new DR 6 -TON ELECTRIC WOOD SPLITTER.  
Figure 2 
Figure 3 
Figure 4 
Remove Wheel 
 Remove Wheel 
Bottom of carton 
Top of carton 
Lift carton up