Compex Technologies NetPassage 15B Manuel D’Utilisation

Chapter 3 Configuring NetPassage 15B

30

4. For Known Server, select the Server Type from the drop down menu and specify

the private IP address of your Virtual Server.

For Custom Server, specify the IP address of the Virtual Server, select the

Protocol used by this application from the drop down menu, specify the TCP/UDP
port used by this application, and enter your preferred reference name in the Server
Type field.

5. Press the Add button to add this new Virtual Server into the list.
6. Press the 

 URL from the Command Menu and press the

Save button.

If you have configured your NetPassage 15B with Static IP WAN type, you have the
option to define Virtual Server based on IP Forwarding.

1. Click on the 

 URL from the Command Menu and the NAT configuration page

will be displayed, as shown in Figure 3.3.3-1.

Figure 3.3.3-1
NAT Configuration
Window for Static IP
WAN Type

2. Press the Static Ip Address Entries button and the list of defined Virtual Server

will be displayed, as shown in Figure 3.3.3-2.

Figure 3.3.3-2
Table Showing Defined
Virtual Server based on IP
Forwarding

3. Press the Add button to define new Virtual Server, as shown in Figure 3.3.3-3.