AudioBahn ABD40J Manuel D’Utilisation
Features and Specifications
4
Because of the variation in the process, we developed the ABD40J to help restore the low
frequencies lost during the process, but the acoustics of various environments are different.
Sweep control allows you to select a center frequency (the frequency most affected) be-
tween 27Hz - 63Hz
Width control then allows you to control the range of other filters centered on the frequency
Sweep.
Bass Processor: Contains circuitry that accurately recreates low frequency information
back into the signal.
L.E.D. Indicators: The three L.E.D. indicators flash when the low frequency equalization
circuit is activated and with increased Sound Pressure Level.
Remote Mount Control: This is a wired level control that allows the user to adjust the pro-
cessor from a remote location.
Specifications
Maximum Input Level________________________________ 15V rms
Maximum Output Level_______________________________ 13.5V peak
Frequency Response________________________________ 10Hz-100kHz, + /-1dB
Total Harmonic Distortion_____________________________ 0.003%
Radio Signal to Noise________________________________ 130 dB
Noise rejection of balanced input_______________________ > 60 dB
Input Impedance____________________________________ 10Kohm
Output impedance___________________________________ 150 ohm
Power Source______________________________________ PWM
Power Extraction____________________________________ 150mA
Recommended Fuse_________________________________ 1 Amp