Areca ARC-1110 Manuel D’Utilisation

158

1. Battery conditioning is automatic. There are no manual pro-

cedures for battery conditioning or preconditioning to be per-

formed by the user.

2. In order to make sure of all the capacity is available for your 

battery cells, allow the battery cell to be fully charged when 

installed for the first time. The first time charge of a battery cell 

takes about 24 hours to complete.

At some point, the LI-ION battery will no longer accept a charge 

properly. LI-ION battery life expectancy is anywhere from ap-

proximately 1 to 5 years.

1. Shutdown the operating system properly. Make sure that 

cache memory has been flushed.

2. Disconnect the battery backup module cable from J2 on the 

SATA RAID controller.

3. Disconnect the battery pack cable from JP2 on the Battery 

Backup Module.

4. Install a new battery pack and connect the new battery pack 

to JP2.

5. Connect the Battery Backup Module to J2 on the SATA RAID 

controller.

6. Disable the write-back function from the BIOS or Utility.

• D13  (Green) : lights when BBM activated

• D14  (Green) : lights when BBM charging

• D15  (Green) : lights when BBM normal

Capacity

Memory Type

Battery Backup duration (Hours)

128MB DDR

Low Power (18mA)

56