Adder Technology 5000 Manuel D’Utilisation

The AdderView CATxIP 5000 provides an 
autosensing Ethernet IP port that can operate 
at 10 or 100Mbps, according to the network 
speed. The AdderView CATxIP 5000 is 
designed to reside quite easily at any part of 
your network: 

•  It can be placed within the local network, 

behind any firewall/router connections to 
the Internet, or

•  It can be placed externally to the local 

network, on a separate sub-network or with an open Internet connection.   

Wherever in the network the AdderView CATxIP 5000 is situated, you will need 
to determine certain configuration issues such as address allocation and/or 
firewall adjustment to allow correct operation. Please refer to 

 within the Configuration chapter for more details. 

1  Depending upon where in the network the AdderView CATxIP 5000 is being 

connected, run a category 5, 5e or 6 link cable from the appropriate hub or 
router to the AdderView CATxIP 5000 unit.

2  Connect the plug of the link cable into the IP port on the front panel of the 

AdderView CATxIP 5000 unit.

3  Configure the network settings as appropriate to the position of the 

AdderView CATxIP 5000 within the network - see 

 for 

details.