Digital Camera Battery SD20 Mode D'Emploi

• Please note that the date and time settings may reset to the default 

settings if the camera battery has been removed for more than three 
weeks. Reset them when this occurs.

• For embedding the date on the image data, refer to page 67.
• To set the camera so that the date and time will not appear on the 

image when it is being shot but only when it is printed, see Setting 
the Print Style (p. 112), the Direct Print User Guide or the Software 
Starter Guide supplied with the camera.

Charging the Date/Time Battery

- The camera has a built-in rechargeable lithium-ion battery for 

saving settings such as the date and time. This battery is 
recharged by the battery pack while it is in the camera. Right after 
purchasing the camera, leave a charged battery pack in the 
camera for about 4 hours to charge the date/time battery. It will 
charge even when the camera power is turned off.

- If the Date/Time menu appears when the camera power is turned 

on, the date/time battery charge is low. Use the above method to 
recharge it.

• Use the 

 or 

 button to select a field 

(year, month, day, hour, minute and date 
format).

• Use the   or   button to change its 

value.

The setting is complete.

The display will return to the shooting or 
playback screen.