Philips 32PF9976 32" Flat TV 32PF9976/12 Manuel D’Utilisation
Codes de produits
32PF9976/12
20
Camera, Camcorder or Game
&
Connect your camera, camcorder or Game as shown.
é
Connect to
VIDEO
2 and
AUDIO L
3 for mono
equipment. For stereo equipment also connect
AUDIO R
3.
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the
connecting the S-VHS cables with the
S-VIDEO
input
1 and
AUDIO
inputs 3.
Do not connect cable 1 and 2 at the same time. This
may cause picture distortion !
may cause picture distortion !
Headphone
&
Insert the plug into the headphone socket L as shown.
é
Press ¬ on the remote control to switch off the
internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000
Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select
internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000
Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select
Headphone volume
to adjust
the headphone volume.
VIDEO
3
2
1
S•VIDEO
AUDIO
To enhance the sound reproduction of your TV you can
connect an externally powered subwoofer (between 20 and
250 Hz).
connect an externally powered subwoofer (between 20 and
250 Hz).
&
Connect the audio cable of the external subwoofer to
the
the
SUBWOOFER
socket at the rear of your TV.
é
Select
Subwoofer
in the Setup, General menu, p. 9.
“
Adjust the frequency of the external subwoofer to 100-
120 Hz (according to your personal preference) if
present on the subwoofer.
120 Hz (according to your personal preference) if
present on the subwoofer.
‘
Adjust the volume level of the external subwoofer,
presumed this control is present on the subwoofer.
See also the instruction manual of the external
subwoofer.
presumed this control is present on the subwoofer.
See also the instruction manual of the external
subwoofer.
SUBWOOFER
Connect extra subwoofer
Multi channel Surround receiver
&
Connect the audio cable to the multi channel Surround receiver
and to
and to
AUDIO OUT L
and
R
at the bottom of your TV 1.
é
If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
CENTRE IN
at the bottom of
your TV 2.
“
Select
Centre Input On
in the Source menu. See p. 10.
The loudspeakers of the TV will now only produce centre
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via
the multi channel Surround receiver.
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via
the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is
blocked via the Child lock menu (see p. 13).
blocked via the Child lock menu (see p. 13).
2
CENTRE IN
AUDIO
OUT
L
R
1
Side connections