Britax FRONTIER 85 Manuel D’Utilisation
12
13
Locking Latch Plate
6.
Has a latch plate that
a
does not allow the belt to
become loose after it is
buckled.
Tightens by pulling on the
b
belt webbing.
ELR (Emergency Locking Retractor) with a Sliding Latch Plate
4.
Has a latch plate that freely
a
slides along the vehicle belt
webbing.
Has a retractor that locks
Has a retractor that locks
b
only in an emergency
situation such as sudden
stop or crash.
IMPORTANT: This belt type requires
the use of a locking clip to secure
the seat during installation. A locking
clip must be secured approximately
1 in. (2.5 cm) from the latch plate to
secure the child seat.
Call Britax Consumer Services at
Call Britax Consumer Services at
1(888) 427-4829 to obtain a locking
clip.
Has a retractor that stops the
b
belt from being pulled out
again once the belt webbing
has been pulled out at least
24 in. (61 cm).
Tightens by feeding the
c
belt webbing back into the
retractor.
Latch
Plate
Adjuster
Latch
Plate
Lap Belt
IMPORTANT: A Lap belt may
only be used to install the child seat
in harness mode and should never be used to secure your child in
booster mode.
ALR (Automatic Locking
5.
Retractor)
Has a latch plate that is
a
sewn into the webbing.
1” (2.5 cm)
from Latch
Plate
Vehicle Compatibility
Vehicle Compatibility