Whirlpool 1328891 Manuel D’Utilisation

4. Insert the foam seal behind the top of the lower window sash 

and against the glass of the upper window.

5. Plug into a grounded 3 prong outlet.

6. Press RESET on the power supply cord. See “Electrical 

Requirements.”

Operating your portable air conditioner properly helps you to 
obtain the best possible results.

This section explains proper portable air conditioner operation.

■

The air conditioner display shows the current room 
temperature and 24-hour clock.

■

When changing modes while the air conditioner is operating, 
the compressor will stop for 3 to 5 minutes before restarting. 

If a button is pressed during this time, the compressor will not 
restart for another 3 to 5 minutes.

■

In Cooling or Dry mode, the compressor and condenser fan 
will stop when the room temperature reaches the set 
temperature.

NOTE: In the event of a power failure, your air conditioner will 
operate at the previous settings when the power is restored.

1. Select the mode. See “Mode.”

2. Select the fan speed. See “Fan Speed.”

3. Set the temperature. See “Temperature.”

4. Press ON/OFF to start the air conditioner.

NOTE: When the air conditioner is turned on for the first time 
after it is plugged in, it will run in the 6

th

 Sense

TM 

System 

control. When the air conditioner is turned on at all other 
times, it will run according to the previous settings. 6

th

 

Sense

TM

 System control can be selected with the remote 

control only.

5. When the WATER FULL indicator light glows red, the air 

conditioner will turn off automatically. See “Portable Air 
Conditioner Care” for directions on draining the air 
conditioner.

A

B