Whirlpool LOAD-SENSING W10330946A Manuel D’Utilisation

Page de 24
6
4.   Add liquid fabric softener to dispenser.  
Fabric softener is added automatically  
during the final rinse cycle. Turn the 
Fabric Softener knob to the softener 
Added position.
 
 
Measure recommended amount of liquid fabric softener. 
 
Do not allow liquid fabric softener to spill, splash, drip,  
or run into the basket or on load. Do not use more than 
the recommended amount. 
Always dilute liquid fabric softener by filling the dispenser  
 
with warm water until reaching the Max Fill Line arrows.  
Undiluted fabric softener can stain fabrics.
5.   Close the washer lid. Washer will not operate with lid open.
 
BEFORE STARTING THE WASHER:
Add all items and laundry products to the washer before pulling 
the Cycle Control knob out to achieve full water and energy 
savings. Opening the lid will reduce or eliminate water savings. 
 
IMPORTANT: When washing any article of clothing, always  
follow fabric care labels and manufacturer’s directions.
1.    Measure detergent and add to the bottom of the washer. If 
desired, add oxi or color-safe bleach products to the bottom 
of the washer as well.
2.   Loosely add sorted load of clothes  
to wash basket.
Load evenly to maintain washer  
 
balance. 
Mix large and small items.
 
Use garment bags for smaller items.
 
    Do not wrap large items such as sheets  
around the agitator. Items need to move  
freely for best cleaning and to reduce  
wrinkling and tangling.
3.   Add only liquid chlorine bleach to the dispenser. Bleach 
is immediately added into the washer and is diluted 
automatically during the wash cycle. 
Liquid chlorine 
bleach dispenser
NOTE: Do not use this dispenser to add powdered chlorine or 
color-safe bleach to your load.
WASHER USE
Using a cup with
 
 a pouring spout, measure amount of 
bleach. Do not allow bleach to spill, splash, drip, or run 
into the basket or on load. Do not use more than the 
recommended amount. 
NOTE: Undiluted bleach will damage any fabric it touches. 
Damage may appear several washings later as rips, tears, holes, 
and color loss.
STARTING YOUR WASHER