Westinghouse 46" 120Hz LED HDTV LD-4695 Mode D'Emploi

English

The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O 
panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, 
screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium 
pay channels. Since the signals of these channels are scrambled, a cable TV 
converter/descrambler is usually provided to the subscriber by the cable TV 
company. This converter/descrambler is necessary for normal viewing of the 
scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels 
is used. If a channel is unknown, consult your cable TV company.) For more specific 
instructions on installing cable TV, consult your cable TV company. One possible 
method of utilizing the converter/descrambler provided by your cable TV company is 
explained below.

NOTE:
The F-type connector should be finger-tightened only. 
When connecting the RF cable to the LED TV, do not 
tighten F-type connector with any tool. If tools are 
used, it may cause damage to the LED TV (e.g. 
breaking of internal circuit).





