Viessmann VITOTROL 100 Mode D’Emploi

In the preset time programs "Prog 1" to
"Prog 3", the day is split into 6 time pha-
ses.

For every enabled time phase, the fol-
lowing must be entered:
■ Start time
■ Stop time
■ Operating modes "Enable", "Block"

You can select time phases for several
days (day groups) or for individual days:
■ "MO–SU" for the same time phases

every day of the week

■ "MO–FR" for the same time phases

Monday to Friday

■ "SA–SU" for the same time phases on

Saturday and Sunday

■ "SINGLE DAY" different time phases

for single days

Note
Settings for individual days take prior-
ity over settings for several days.
 

1.  Open the flap.

2.  Press twice 

.

3.  Select with  /  "SETTINGS".

4.  Confirm with OK.

5.  Select with  /  "Programs".

6.  Confirm with OK.

7.  Select with  /  the program you

want to change (e.g. "Prog 1").

8.  Confirm with OK.

9.  Select with  /  "DHW".

10.  Confirm with OK.

11.  Select with  /  "Set".

12.  Confirm with OK.

13.  Select with  /  the required day

group/individual day.

14.  Confirm with OK.

15.  Select with  /  the time phase or first

the required day.

16.  Confirm with OK.

17.  With  /  set the required start time,

stop time and the temperature, one
after the other (e.g."Block").

18.  Confirm respectively with OK.

19.  Proceed as described in points 15 to

18 to set further time phases.

DHW heating

 (cont.)

5592 620 GB