Marantz AV Pre Tuner AV7005 Manuel D’Utilisation

15

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

• Menu screen

• Status display screen

When the input source is 
switched

When the volume is adjusted

Adjust various audio and video parameters

Audio/Video Adjust

Information

Auto Setup

Manual Setup

Input Setup

MENU

Input

Auto

STEREO

BD

Mode

Master  Volume   -80.0dB

Status display:  The  operating  status  appears  briefly  on  the  screen 

when  the  input  source  is  switched  or  the  volume  is 
changed.

• If you operate the menu while playing back 3D video content, the playback video is replaced by the menu 

screen. The playback video is not displayed behind the menu screen.

• This unit does not show the status display while playing back 3D video content.

You can connect up to six HDMI-compatible devices to the unit.

This unit supports the following HDMI functions: 
• 3D
• Deep Color (vpage 109)
• Auto Lip Sync (vpage 80, 109)
• x.v.Color, sYCC601 color, Adobe RGB color, Adobe YCC601 color (vpage 109, 111)
• High definition digital audio format
• ARC (Audio Return Channel)
• Content Type
• CEC (HDMI control)

In order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection, both 
this unit and TV or the player need to support the copyright protection system known as HDCP (High-
bandwidth Digital Content Protection System). HDCP is copyright protection technology comprised of 
data encryption and authentication of the connected AV device. This unit supports HDCP. 
• If a device that does not support HDCP is connected, video and audio are not output correctly. Read 

the user guide of your television or player for more information.

• When a device supporting Deep Color signal transfer is connected, use a cable compatible “High Speed 

HDMI cable” or “High Speed HDMI cable with Ethernet”.

• When the ARC function is used, connect a device with a ”Standard HDMI cable with Ethernet” or “High 

Speed HDMI cable with Ethernet” for HDMI 1.4a. 

HDMI control function (vpage 55)

This function allows you to operate external devices from this unit and operate this unit from external 
devices.

• The HDMI control function may not work depending on the device it is connected to and its settings.
• You cannot operate a TV or Blu-ray Disc player/DVD player that is not compatible with the HDMI control 

function.

This unit supports input and output of 3D (3 dimensional) video signals of the HDMI 1.4a standards.
For  playing  the  3D  video  content,  a  player,  and  a  TV  that  support  the  3D  function  of  the  HDMI  1.4a 
standards are required in addition to this unit.

• If you operate the menu while playing back 3D video content, the playback video is replaced by the menu 

screen. The playback video is not displayed behind the menu screen.

• This unit does not show the status display while playing back 3D video content.

The Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data “upstream” 
to this unit.

• To enable the ARC function, set “HDMI Control” to “ON” (vpage 80).
• ARC function is only supported for the HDMI OUT 1 connector. In order to use the ARC function, connect 

the television to the HDMI OUT 1 connector.

• When connecting a TV that does not support the ARC function, a separate connection using an audio 

cable is required. In this case, refer to “Connecting a TV” (vpage 17) for the connection method.

The  HDMI  specification  version  1.4a  enables  simple,  automated  picture  setting  selection  with  no  user 
intervention. 

To enable the Content Type, set “Video Mode” to “Auto” (vpage 70).

1.AV7005U_ENG.indd   15

2010/08/23   18:32:10