Marantz AV Pre Tuner AV7005 Manuel D’Utilisation

71

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

The input modes available for selection may vary depending on the input source.

Input Mode
Set the audio input modes 
for the different input 
sources.

Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
7.1CH  IN  :  Only  signals  input  from  the  7.1CH  INPUT  terminal  will  be 
played back. 

• This  can  also  be  set  by  pressing 

  on  the 

remote control unit.

• Each time 

 is pressed, the setting is changed 

as shown below.

Auto

HDMI

Digital

Analog

7.1CH IN

• “HDMI” can be set for input sources for which “HDMI” is assigned at 

“Input Assign” (vpage 69).

• “Digital” can be set for input sources for which “Digital” is assigned at 

“Input Assign” (vpage 69).

• If the input source is set to “TV” or “Game”, it cannot be set to “Analog”.
• When  digital  signals  are  properly  input,  the 

  indicator  lights  on 

the display. If the 

 indicator does not light, check the digital input 

connector assignment and the connections.

• The surround mode cannot be set if the input mode is set to “7.1CH IN”.
• If “HDMI Control” is set to “ON” and a TV compatible with the ARC is 

connected via the HDMI OUT connectors, the input mode whose input 
source is “TV” is fixed to ARC.

Decode Mode
Set the decode mode for 
input source.

BD   DVD   VCR  

SAT   GAME   AUX1  

  CD   CDR  

Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.

 

• This item can be set for input sources for which “HDMI” or “Digital” is 

assigned at “Input Assign” (vpage 68).

• Normally  set  this  mode  to  “Auto”.  Set  “PCM”  and  “DTS”  when 

inputting the corresponding input signal.

Move the cursor 
(Up/Down/Left/Right)

Confirm the setting

Return to previous menu

Change the display name of the selected input source.

Rename
Change the display name of 
the selected input source.

• Up to eight characters can be input.
• For character input, see page 65.

Default
The input source name 
is returned to the default 
setting.

Yes : Reset to the defaults.
No : Do not reset to the defaults.

• This function corrects the playback level of the selected input source’s audio input.
• Make this setting if there are differences in the input volume levels between the different sources.

 The  analog  input  level  and  digital  input  level  can  be  adjusted  independently  for  input  sources  for 

which “HDMI” or “Digital” is assigned at “Input Assign“ (vpage 68).

Make settings for repeat playback mode or random playback mode.

Repeat
Make settings for repeat 
mode.

All : All files are played repeatedly.
One : A file being played is played repeatedly.
OFF : Repeat playback mode is canceled.

Random
Make random mode 
settings.

ON : Enable random playback.
OFF : Disable random playback.

1.AV7005U_ENG.indd   71

2010/08/23   18:33:11