Marantz AV Pre Tuner AV7005 Manuel D’Utilisation

Page de 128
80
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Manual Setup
HDMI Setup
Default settings are underlined.
Make settings for HDMI video/audio output.
Setting items
Setting details
RGB Range
Set the video range of RGB 
output from the HDMI 
connector.
Normal : Output with RGB video range (16 (black) to 235 (white)).
Enhanced : Output with RGB video range (0 (black) to 255 (white)).
 This setting is active when using a TV equipped with a DVI terminal.
Auto Lip Sync
Make automatic 
compensation for timing 
shift in audio and video 
output.
ON : Compensated.
OFF : Not compensated.
HDMI Audio Out
Select HDMI audio output 
device.
AMP : Play back through speakers connected to this unit.
TV : Play back through TV connected to this unit.
 When the HDMI control function is activated, priority is given to the TV 
audio setting (vpage 55 “HDMI control function”).
Monitor Out
Make settings for HDMI 
monitor output.
Monitor 1 : A TV connected to the HDMI OUT 1 terminal is always used.
Monitor 2 : A TV connected to the HDMI OUT 2 terminal is always used.
 With  “Resolution”  (vpage  70)  not  set  to  “Auto”,  check  whether 
the TV you are using is compatible with the resolution under “HDMI 
Information” – “HDMI Monitor 1 Information” and “HDMI Monitor 2 
Information” (vpage 88).
HDMI Control
You can link operations with 
devices connected to HDMI 
and compatible with HDMI 
Control.
ON : Use HDMI control function.
OFF : Do not use HDMI control function.
• When a device that is not compatible with the HDMI control function is 
connected, set “HDMI Control” to “OFF”. 
• Please consult the operating instructions for each connected component 
to check the settings.
• Refer to “HDMI control function” (vpage 55) for more information about 
the HDMI control function.
NOTE
• When “HDMI Control” is set to “ON”, it consumes more standby
power.  If  you  are  not  using  this  unit  for  an  extended  period,  it  is 
recommended that you unplug the power cord from the power outlet.
• “HDMI Control” does not work when the power to the equipment is off. 
Either turn power on or set to standby.
• The HDMI control function controls operations of a TV that is compatible 
with the HDMI control function. Make sure that the TV and HDMI are 
connected when you perform HDMI control.
• If  the  “HDMI  Control”  settings  have  been  changed,  always  reset  the 
power to connected devices after the change.
Remote control operation
buttons
Move the cursor 
(Up/Down/Left/Right)
Confirm the setting
Return to previous menu
Setting items
Setting details
Crossover Frequency
Set the maximum frequency 
of the bass signal output 
from each channel to 
the subwoofer. Set the 
Crossover Frequency to 
suit the bass reproduction 
capability of the speaker 
being used.
Crossover : Set the crossover frequency.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 
250Hz
Advanced : Specify crossover frequency for each speaker.
• Front  /  Center  /  Surround  /  S.Back  /  F.Height  /  F.Wide  :  Select  the 
speaker.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 
250Hz : Set the crossover frequency.
• “Crossover  Frequency”  can  be  set  when  the  “Bass  Setting”  – 
“Subwoofer Mode” (vpage 79) setting is “LFE+Main”, or when you 
have a speaker that is set to “Small”. 
• Always  set  the  crossover  frequency  to  “80Hz”.  When  using  small 
speakers, however, we recommend setting the crossover frequency to 
a higher frequency.
• For  speakers  set  to  “Small”,  sound  below  the  crossover  frequency 
is  cut  from  the  sound  output.  The  cut  bass  sound  is  output  from  the 
subwoofer or front speakers.
• The  speakers  that  can  be  set  when  “Advanced”  is  selected  differ 
depending on to the “Subwoofer Mode” setting (vpage 79).
•  When “LFE” is selected, speakers set to “Small” at “Speaker Config.” 
can be set. If the speakers are set to “Large”, “Full Band” is displayed 
and the setting cannot be made.
•  If  set  to  “LFE+Main”,  this  setting  can  be  made  regardless  of  the 
speaker size.
1.AV7005U_ENG.indd   80
2010/08/23   18:33:14