Compex Technologies WP11A+ Manuel D’Utilisation
Chapter 9
Configuring Network Address Translation
60
If you require assigning more PCs in your LAN as servers, use the “Add” button to
define the port-forwarding virtual server.
define the port-forwarding virtual server.
To utilize NAT, you have to enter the Private IP Address of the Virtual Server and the
Server Type (e.g. HTTP).
Server Type (e.g. HTTP).
For those Internet applications not defined in the Known Server, you will have to enter
Port in the Custom Server (the port number for TCP/UDP port used by this Virtual
Server). You can also assign a name to this Virtual Server in the Server Type field.
Choose a Protocol for this Virtual Server ports. (e.g. TCP or UDP).
Port in the Custom Server (the port number for TCP/UDP port used by this Virtual
Server). You can also assign a name to this Virtual Server in the Server Type field.
Choose a Protocol for this Virtual Server ports. (e.g. TCP or UDP).
By clicking on the “Add” button at the Add New Port Based Entry, you have added a
new Virtual port.
new Virtual port.
If you wish to delete any of the entry, just select that particular entry and hit the
“Delete” key on the keyboard.
“Delete” key on the keyboard.
9.4
Configuring IP-Forwarding virtual server with Compex WP11A+
1. Click
NAT at the Command window.
2. Select Enable NAT. Click “Apply” button and then click “Static IP Address
Entries” button.
Figure 9.4a
IP Forwarding Option