Craftsman 152.22018 Manuel D’Utilisation

8

1.

WHEEL GUARD - Covers the grinding wheels and
protects against accidental contact.

2.

WHEEL COVER - Covers the grinding wheels and
provides access for routine maintenance.

3.

MOTOR HOUSING - Contains the electrical motor.

4.

EYESHIELD MOUNTS - Supports the eyeshields.

5.

EYESHIELDS - Protective Lexan see-thru shields
to prevent any loose debris from contacting the
operator.

6.

FLEXIBLE WORK LIGHT - Provides assistance to
the operator for grinding operations.

7.

SPARK ARRESTORS - Prevents hot sparks and
debris from contacting the operator.

8.

TOOL REST ADJUSTABLE SUPPORTS - Lets the
operator position the tool rest closer to the wheel as
the wheel decreases in diameter due to wear.

9.

TOOL RESTS - Used to support the workpiece
that is being ground. Adjustable to provide angled
surfaces.

10.

A) GRINDING WHEEL 120 GRIT - Used to remove
light material from workpiece.

10.

B) GRINDING WHEEL 60 GRIT - Used to remove
heavy material from workpiece.

11.

ON / OFF SWITCH - Used to turn “ON” and turn
“OFF” the grinder.

12.

WHEEL DRESSER - Used to clean and smooth
surface of the 8" Grinding Wheel (not shown).

13.

QUENCH TRAY - Used to cool workpiece after
grinding.

14.

MOUNTING PAD - Used to secure the grinder to a
workbench or suitable work surface.

15.

GRINDING WHEEL IDENTIFICATION LABEL -
Provides information on wheel size, grit and maxi-
mum RPM. Must be left on to distribute the load of
tightening the Lock Nuts (not shown).

16.

ARBOR BUSHING - Used when wheels have an
oversized wheel bore (not shown).

17.

FLANGES - Used to secure the grinding wheels to
the grinder and distribute the load of the Lock Nuts
(not shown).

18.

LOCK NUT - Used to secure the grinding wheels to
the grinder (not shown).