Summit SWC525L7CSS Manuel Du Propriétaire
4
Technical Information
Model
SWC525L SWC525LBI
Installation
Free-standing Built-in
Color
Black with glass door
Capacity
42 standard wine bottles
Electrical Input
115V AC / 60Hz
Temperature Range
45°F - 65°F (7°C - 18°C)
Refrigerant
R134a, 1.59 oz.
Unit weight
66.0 lbs.
Unit Dimensions
(W x D x H*)
(W x D x H*)
20.0" x 23¼" x
33¼"
20.0" x 23¼" x
33¼" to 34½"
*For models with suffix ADA, height is modified to 32” for use under lower counters
Installation Instructions
Before Using Your Wine Cellar:
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
6 chrome shelves
2 chrome racks
2 keys
Instruction manual
Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installing the Wine Cellar:
Place your unit on a floor that is strong enough to support it when it is fully loaded.
To level your unit, adjust the leveling leg at the bottom.
To level your unit, adjust the leveling leg at the bottom.
Model SWC525L is designed to be free-standing only, and should not be
recessed or built in (fully recessed). On the other hand, model SWC525LBI is
specifically designed to be built in.
recessed or built in (fully recessed). On the other hand, model SWC525LBI is
specifically designed to be built in.
Model SWC525L: Allow 5 inches of space at the back, sides and top of the unit,
which will allow the proper air circulation to cool the compressor.
which will allow the proper air circulation to cool the compressor.
Model SWC525LBI: This built-in model is designed to be installed under the
counter in a 21-inch opening. When installing, provide the following clearances to
ensure the best operation and proper ventilation: 1/4” on both sides, 2” at the rear
counter in a 21-inch opening. When installing, provide the following clearances to
ensure the best operation and proper ventilation: 1/4” on both sides, 2” at the rear