Whirlpool CGT8000XQ Manuel De Montage

The washer can be installed using the standpipe drain system 

(floor or wall), the laundry tub drain system, or the floor drain 
system. 

The standpipe drain requires a minimum diameter standpipe  

of 2" (51 mm). The minimum carry-away capacity can be no 
less than 10 gal. (38 L) per minute.

The top of the standpipe must be at least 30" (762 mm) high 

and no higher than 96" (2.4 m) from the bottom of the washer.

The laundry tub needs a minimum 20 gal. (76 L) capacity.  

The top of the laundry tub must be at least 30" (762 mm)  

above the floor.

The floor drain system requires a siphon break that may be 

purchased separately. 
The siphon break (Part Number 285834) must be a minimum of 

28" (710 mm) from the bottom of the washer. Additional hoses 

might be needed.