Summit FF511LMED Utilisation Et Entretien

Page de 16
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Factory-set default password: The factory-set default password is 0123. If the default 
password is lost, press the 
key (located inside the battery 
box) for 30 seconds, then wait for the warning sound which 
signifies the factory-set default password has been restored. 
To set the password: While door is open, press the 
key 
(located inside the battery box) until it jingles, enter the 0123 
password, then # within 10 seconds to confirm. Enter the 
password (1-16 digits), then press # again to confirm. A total 
of 10 passwords can be set.  
Note:  Each password starts with a number from 0 to 9 in order. The first password 
starting with 0 is the default password. For example, use 1xxx, then 2xxx etc. 
for 10 users. 
Changing password: While the door is open, press the 
key (located inside 
the battery box) until it jingles, enter the old password and press # within 10 
seconds to confirm. Enter the new password, then press # to confirm.  
Note: The first digit cannot be changed. 
To open the door:  While the door is closed, press the 
key, enter the 
password, then press 
again to confirm. 
To lock door manually:  Press #. 
Function setting of automatic lock:  Setting of the auto-lock time: Press the 
key (inside the battery box), enter a number (any number between 10-99), 
then press # to confirm. The auto-lock time can be set  between 10-99 seconds 
after opening the door. If the time is set less than 10 seconds, the door will not lock 
automatically, only manually. 
Deleting the door-opening passwords:  Press the 
key, enter default 
password followed by 0000, then press # and all the door-opening passwords will 
be deleted except for the default password.
 
 
Note: To access the battery box you need to remove only the two small screws on 
the top and bottom of that cover. Do not remove the 4 screws holding the 
keypad and cover to the appliance door.  
KEYPAD LOCK 
(Optional on most models)
  
OPERATION OF SPECIFIC MODELS 
SCFF55/SCFF51OSWH MED Series 
These are built-in, frost-free units that do not require defrosting. At the top of the unit is a 
cooling system that uses a fan to provide cold air. For best operation, do not block the 
air flow with contents.  
Felix Storch, Inc. 
Page 12