Summit SCR600LOS Utilisation Et Entretien

These instructions are important, and we request you read them before using this 
refrigerator.  They describe the appliance and the correct and safe way to use it.  The 
instructions were prepared for various models/types of refrigerators so you may find 
descriptions of some accessories and functions that do not apply to yours. 

•  Before connecting the appliance to the power supply, leave it standing for 

about 2 hours. This allows the lubricants to drain back into the compressor 
and reduces the risk of malfunctions in the cooling system caused by 
shipping. 

•  Clean the appliance thoroughly; especially the interior (See Maintenance 

and Cleaning). 

 
 

•  Our appliances are distributed in packaging made of environmental 

friendly materials which can safely be recycled, disposed of or destroyed 
with minimal environmental effects. 

•  Our instruction manuals are printed on recycled paper or chlorine free 

bleached paper. 

 

•  Try not to open the door or drawers too often, especially when the weather 

is hot and humid.  Once you open the door or drawer try to close it as soon 
as possible. 

•  Periodically check that the appliance is sufficiently ventilated.  Although 

the back of the unit is sealed, the rear cover should have a small air gap 
from the surface behind it. This will enhance cooling and save energy. 

•  Set the thermostat from a higher to lower setting whenever possible, 

depending on how full the appliance is or what the ambient temperature is. 

•  Make sure the underside of the unit is kept clear of leaves, debris or 

anything that can impede air flow. 

•  Keep the unit out of direct sunlight. 

•  Periodically check that the refrigerator seals well and none of the contents 

prevent the door or drawer from closing. 

 
 
 
 
 
 
 

Instructions for Use 

 

2