Whirlpool G7CG3064X Manuel De Montage

Make Gas Connection

Typical flexible connection

1. Apply pipe-joint compound made for use with Natural and LP

gas to the smaller thread ends of the flexible connector
adapters (see C and G in the following illustration).

2. Attach one adapter to the gas pressure regulator and the

other adapter to the gas shutoff valve. Tighten both adapters.

3. Use a

¹⁵⁄₁₆" combination wrench and channel lock pliers to

attach the flexible connector to the adapters. Check that
connector is not kinked.

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure
gas pressure does not exceed 14" (36 cm) water
column.

Examples of a qualified person include:

licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.

Failure to do so can result in death, explosion, or fire.

No appliance
below cooktop

Wall oven installed below cooktop

A. Manifold entrance
B. Gas pressure regulator

C. Use pipe-joint

compound.

D. Adapter (must have ½"

male pipe thread)

E. Flexible connector

F. Adapter

G. Use pipe-joint

compound.

H. Manual gas shutoff

valve

I. ½" or ¾" gas pipe

A. Manifold entrance
B.

³⁄₈" elbow

C. Use pipe-joint compound.
D. Adapter (must have

³⁄₈" male pipe

thread)

E. Flexible connector (pass through wall

between cabinets)

F. Adapter (must have

³⁄₈" male pipe

thread)

G. Use pipe-joint compound.
H. Appliance pressure regulator

(supplied)

I. ½" or ¾" gas pipe

J. Manual gas shutoff valve

K. ½" or ¾" gas pipe