Summit FFBF101 Utilisation Et Entretien
7) Place the refrigerator door on the middle
hinge. Be sure the door is aligned
horizontally and vertically, and that the
gasket seals on all sides before attaching
the top hinge. Attach the top hinge and
replace the hinge cover.
horizontally and vertically, and that the
gasket seals on all sides before attaching
the top hinge. Attach the top hinge and
replace the hinge cover.
1.3 Door Space Requirements
The unit's door must be able to open fully as shown.
W×D ≥ 41.3”×42.9”
W×D ≥ 41.3”×42.9”
1.4 Leveling the Unit
If the appliance is not leveled during installation, the doors may not
close or seal properly, causing cooling, frost, or moisture problems.
It is very important for the refrigerator-freezer to be level in order to
function properly.
To level your refrigerator-freezer, you may either turn the adjustable foot clockwise to raise that side
of the appliance or turn it counter-clockwise to lower that side.
NOTE: Having someone push against the top of the refrigerator-freezer will take some weight off the
adjustable foot and make it easier to turn.
close or seal properly, causing cooling, frost, or moisture problems.
It is very important for the refrigerator-freezer to be level in order to
function properly.
To level your refrigerator-freezer, you may either turn the adjustable foot clockwise to raise that side
of the appliance or turn it counter-clockwise to lower that side.
NOTE: Having someone push against the top of the refrigerator-freezer will take some weight off the
adjustable foot and make it easier to turn.
1.5 Cleaning before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water
using a wrung-out sponge or cloth. Wash the shelves and salad bin in warm soapy water and dry
completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
using a wrung-out sponge or cloth. Wash the shelves and salad bin in warm soapy water and dry
completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
5
W
D