Summit FFBF280WXIM Manuel D’Utilisation

Page de 46
 
 
Before starting the refrigerator 
Check the following before you start to 
use your refrigerator:   
1. Attach 2 plastic spacers as 
illustrated below. The spacers are 
intended to keep the proper 
distance between your refrigerator 
and the wall to ensure optimum air 
circulation. (The picture is provided 
as a representation and is not 
meant to be identical with your 
product.)   
 
 
 
 
 
 
 
 
 
 
 
2. Clean the interior of the appliance 
as recommended in the 
“Maintenance and cleaning” 
section.   
3. Connect the plug of the appliance to 
the wall socket. When the 
refrigerator door is opened, the 
internal light will turn on.   
4. When the compressor starts to 
operate, a sound will be heard. The 
liquid and gases sealed within the 
refrigeration system may also give 
rise to noise, even if the compressor 
is not running. This is normal.   
5. The front edges of the refrigerator 
may feel warm. This is normal. 
These areas are designed to be 
 
warm to avoid condensation.   
 
Electrical connection   
                 Warning  
Improper use of the grounded plug 
can result in the risk of electrical 
shock. If the power cord is damaged, 
have it replaced by an authorized 
service center. 
  This appliance should be properly 
grounded for your safety. The 
power cord is equipped with a 
three-pin plug that mates with 
standard three-prong wall outlets to 
minimize the possibility of electrical 
shock. 
  Do not under any circumstances cut 
or remove the third ground prong 
from the power cord supplied. 
  This refrigerator requires a standard 
115Volts AC~ 60Hz electrical outlet 
with three-prong grounded 
receptacle. Use a 15-amp fuse. 
  To prevent accidental injury, the 
cord should be secured behind the 
appliance and not left exposed or 
dangling. 
  Never unplug the refrigerator by 
pulling the power cord.    Always 
grip the plug firmly and pull straight 
out from the receptacle. 
  Do not use an extension cord with 
this appliance. If the power cord is 
too short, have a qualified 
electrician or service technician 
install an outlet near the appliance. 
3
 Installation