Whirlpool WED97HEDC Manuel De Montage

Using a T25

®

 screwdriver, remove the 2 screws securing the  

door strike to the door frame of the dryer. Rotate the strike  

180° and attach to the opposite side of dryer door frame,  

as shown.

Position the door with the inside of the door facing up.  

Using a Phillips screwdriver, remove the 10 screws securing 

the inner door to the outer door. Lift off the inner door and  

set aside. 

IMPORTANT: If the protective film has not yet been removed 

from the dryer, peel the film from the dryer door before 

proceeding.

Using a T25

®

 screwdriver, remove the 4 screws securing the 

door hinge to the dryer and lift up and out to remove the door. 

Place the door on a soft towel or other non-scratch surface. 

Reinstall the 4 screws in the holes. 

#2 Phillips screwdriver

Min. 8" long TORX

®

  

T25

® †

 screwdriver

†

 ® TORX and T25 are registered trademarks of Acument Intellectual Properties, LLC.

The following instructions are for models with round and  

square-shaped doors.