Summit GC424BGL Manuel D'Instructions
6
Gas Connection
Natural Gas and Propane Gas
Natural gas installations require the connection of a gas regulator to the cooktop.
You will find this regulator among the accessories supplied with the appliance.
You will find this regulator among the accessories supplied with the appliance.
Assemble the regulator (noting the direction of gas flow) and transition pieces
(supplied) in accordance with the figure below.
(supplied) in accordance with the figure below.
The transition piece on the supply side of the regulator must be provided by the
installer. Unions compatible with the hose fittings must be used and connections
tested for gas leaks.
installer. Unions compatible with the hose fittings must be used and connections
tested for gas leaks.
Be sure that the supply connection point is accessible with the appliance
installed.
installed.
WARNING: Be sure the hose assembly is restrained from accidental contact with
the flue or flue outlet of an under-counter oven.
Electrical Connection
The electrical connections of the appliance must be carried out in compliance
with local standards and provisions.
with local standards and provisions.
Before connecting the appliance, check that:
1. The electrical capacity of the main electrical supply and current sockets suit
the maximum power rating of the appliance. (See the data label attached to
the bottom of the cooktop.)
the bottom of the cooktop.)
2. The socket or system has an efficient ground connection in compliance with
local standards and provisions. The manufacturer is not responsible for failure
to comply with these provisions.
to comply with these provisions.