GE PDT750SMF-ES Guide De Montage

• Phillips-head screwdriver
•  1/4" and 5/16" nutdriver
•  6" Adjustable wrench 
• Level
• Carpenter's square
• Measuring tape
• Safety glasses
• Flashlight
•  %XFNHWWRFDWFKZDWHUZKHQÀXVKLQJWKHOLQH
•  15/16" socket (optional for skid removal)
• Gloves
• Pliers

• Tubing cutter
•  Drill and appropriate bits
•  Hole saw set

• Junction box cover and #10 hex-head screw
• Hose clamp
• Drain hose (approximately 78" long)
• Drain hose hanger

• 2 #8-18 hex head screws to secure brackets to washer 

tub frame

• 1 top trim piece (on some models)
• 2 side trim pieces 

• 2 mounting brackets for wood countertops or side 

cabinets 

• 2 #8-18 x 5/8" Phillips special head screws, to secure 

dishwasher to underside of countertop or to side 

cabinets 

• Literature, samples and/or coupons

•  90° elbow (3/4"hose internal thread on one end, 

opposite end sized  
to fit water supply)

• UL-listed wire nuts (3)
• Masking Tape

•  Air gap for drain hose, if required
•  Waste tee for house plumbing, if applicable
•  Electrical cable or power cord depending on your 

model, quick connect power cords are availble.

•  Screw-type hose clamps
•  Strain relief for electrical connection
•  Hand shut-off valve (recommended)
•  Hot Water Line–3/8" minimum, copper tubing 

(including ferrule, compression nut) or GE Part # 

WX28X326, flexible braided hose.

• GPF12 or WD24X10065 drain hose (12' long), if needed