Samsung HWJ6500 Manuel D’Utilisation
9
ENG
DESCRIPTIONS
reMOTe CONTrOL
anynet+
Press the anynet+ button to turn the anynet+ function on or off.
(Default : auto Power Link OFF, On - anynET+ / OFF - POWEr LInK or OFF
- anynET+ / On - POWEr LInK). The anynet+ function lets you control the
Soundbar with the remote from an anynet+ compatible Samsung TV. The
Soundbar must be connected to the TV via an HDMI cable.
* auto Power Link
Press the anynet+ button to turn the anynet+ function on or off.
(Default : auto Power Link OFF, On - anynET+ / OFF - POWEr LInK or OFF
- anynET+ / On - POWEr LInK). The anynet+ function lets you control the
Soundbar with the remote from an anynet+ compatible Samsung TV. The
Soundbar must be connected to the TV via an HDMI cable.
* auto Power Link
Synchronizes the Soundbar to a connected Optical source via the
Optical jack so it turns on automatically when you turn on your TV.
(See page 17)
Optical jack so it turns on automatically when you turn on your TV.
(See page 17)
You can also activate Wi-Fi SETUP function by pressing and holding
anynet+ button on the remote for over 7 seconds.
anynet+ button on the remote for over 7 seconds.
repeat
Press to set the repeat function during music playback from a uSB device.
OFF - rEPEaT : Cancels repeat Playback.
TraCK - rEPEaT : repeatedly play a track.
aLL - rEPEaT : repeatedly play all tracks.
ranDOM - rEPEaT : Plays tracks in random order.
(a track that has already been played may be played again.)
Press to set the repeat function during music playback from a uSB device.
OFF - rEPEaT : Cancels repeat Playback.
TraCK - rEPEaT : repeatedly play a track.
aLL - rEPEaT : repeatedly play all tracks.
ranDOM - rEPEaT : Plays tracks in random order.
(a track that has already been played may be played again.)
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOUrCE
Press to select a source connected to the Soundbar.
Press to select a source connected to the Soundbar.
Skip Forward
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
SOUnD COnTrOL
Press to select TrEBLE, BaSS, or aUDIO SynC. Then, use the [,]
buttons to adjust the Treble or Bass volume from -3 to +3.
Press and hold the SOUnD COnTrOL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz, and 10KHz are selectable and each can be adjusted to a
setting between -6 and +6.
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the SOUnD COnTrOL button to sync the audio
with the video. use the [,] buttons to set the audio delay between
0 ms and 300 ms. In uSB mode, TV mode, and BT mode, the audio Sync
function may not available.
Press to select TrEBLE, BaSS, or aUDIO SynC. Then, use the [,]
buttons to adjust the Treble or Bass volume from -3 to +3.
Press and hold the SOUnD COnTrOL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz, and 10KHz are selectable and each can be adjusted to a
setting between -6 and +6.
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the SOUnD COnTrOL button to sync the audio
with the video. use the [,] buttons to set the audio delay between
0 ms and 300 ms. In uSB mode, TV mode, and BT mode, the audio Sync
function may not available.
● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.