Whirlpool W10298318RP Manuel De Montage

imPoRtant: The stacked washer/dryer can be installed in  

an enclosure. Check the locations of the water supply faucets, 

grounded electrical outlets, and gas supply line connection  

(gas dryer only). Depending on your application, longer washer  

fill hoses, longer electric power supply cords and a longer  

flexible stainless steel gas connector line than supplied with  

the washer/dryer may be needed.

/

If the water supply faucets, electrical outlets, gas supply line, 

or power cord need modification, have a qualified plumber, 

electrician, or gas technician make the changes.

Mobile Home Installation Kit, Part Number 346764, needs to 

 

■

be purchased to accomplish this. Order two kits to enable 

you to secure both the front and the back of the unit to the 

floor.
Metal exhaust system hardware.

 

■

The exhaust vent must be securely fastened to a noncombustible 

portion of the mobile home structure and must not terminate 

beneath the mobile home. Terminate the exhaust vent outside.

This dryer is suitable for mobile home installations. The 

installation must conform to the Manufactured Home 

Construction and Safety Standard, Title 24 CFR, Part 3280 

(formerly the Federal Standard for Mobile Home Construction and 

Safety, Title 24, HUD Part 280) or the Canadian Manufactured 

Home Standard CAN/CSA-Z240 MH.

Mobile home installations require special parts (listed following), 

which are available for purchase from your local dealer or service 

center. 

Stacked pair must be securely fastened to the floor. 

Special provisions must be made in mobile homes to introduce 

outside air into the dryer. The opening (such as a nearby window) 

should be at least twice as large as the dryer exhaust opening.