GE GSD3300DBB Manuel De Montage

Page de 32
Installation Preparation – Enclosure
PREPARE DISHWASHER ENCLOSURE 
Figure A
To reduce the risk of shock, fire, or injury 
to persons, the installer must ensure that 
the dishwasher is completely enclosed at 
the time of installation.
#282 French
WARNING
• The rough cabinet opening must have a minimum 
width and depth of 24" and height of 34-1/2" ± 1/4" 
from the floor to the underside of the countertop.
• The back wall should be free of pipes or wires.
• Adjacent cabinets should be square and plumb to 
ensure a good fit. Refer to Figure A.
• For a corner installation, allow 2" minimum 
clearance between the dishwasher and the 
adjacent wall.
• Provide at least 27" in front of the dishwasher to 
allow the dishwasher door to open fully. Refer to 
Figure B.
• Make sure the floor is level inside the opening and 
even with the finished floor of the kitchen. This will 
facilitate removal of the dishwasher at a later date 
for service, if needed.
3
Figure B
• The dishwasher must be installed no more than  
10 feet from sink for proper drainage.
• The dishwasher must be fully enclosed on the top, 
sides and back.
• The dishwasher must not support any part of the 
enclosure.
2" Minimum
Countertop
Dishwasher
27" Minimum
05A-1183F
Clearances:
In a corner installation, provide 
at least 2" clearance between 
the dishwasher and the adjacent 
cabinet, wall or other appliance. 
Provide at least 27" of clearance  
in front of the dishwasher.
Para reducir el riesgo de choque, incendio 
o lesión a personas, el instalador se 
debe cerciorar de que la lavadora esté 
completamente cerrada en el momento  
de la instalación.
#282 French
ADVERTENCIA
#282 French