Bose® Wave SoundTouch Manuel Du Propriétaire

Setting Up Your Wave

®

 SoundTouch™ Music System

Note:  Before you start setting up this system, be sure to read  

"Important setup options" on page 7.

1.  Place the SoundTouch™ pedestal on a flat, stable surface.
2.  Carefully set your Wave

®

 music system on top of the 

 SoundTouch

TM  

pedestal.

•  Make sure the rear feet of the Wave

®

 music system fit into 

the recesses on top of the SoundTouch

TM

 pedestal.

•  Make sure the Wave

®

 music system sits flat and the side 

edges of both units are aligned.

SoundTouch™ 

pedestal

Place rear feet 

into recesses

®

3.  Make the connections:

A.  Insert the SoundTouch™ pedestal cable into the Bose link 

connector.

B.  Insert the small plug on the power cord into the connector 

labeled 

AC Power.

C.  Plug the other end into a live AC (mains) power outlet.

4.  Unwind and straighten the power cord to ensure the best FM 

radio reception. The power cord is used as an antenna.

After plugging in your Wave

®

 SoundTouch™ music system, it is 

easily operated using the remote control. Just aim the remote at 

the front panel and press the necessary buttons. 
To set the clock:
1.  Press and hold either Time – or Time + for about 1 sec.
Note:  Press-and-hold operations require holding the button down 

for about one second.

Initially, 

HOLD TO SET appears on the display and then 

quickly changes to 

– CLOCK SET – as the button is  

depressed.

2.  Release the selected Time button.
3.  Press Time – to adjust the displayed time backward or press 

Time + to adjust the displayed time forward until it matches 

the current time. You can also press and hold for rapid  

adjustment.

4.  Wait five seconds for the system to exit the clock setup mode 

automatically.

Note:  To change the clock display from 12-hour (AM/PM)  

time to 24-hour time, see "Changing the time format" on 

page 23.

Note:  If the Wave® SoundTouch

™

 music system loses power due 

to a power outage or unplugging the unit to move it, all 

system settings will be permanently retained. However, the 

clock time will only be temporarily stored in backup memory 

for up to 48 hours.