Philips BTM2460/12 Manuel D’Utilisation
12 EN
5 Listen to the
radio
Tip
•
Position the antenna as far as possible from TV or other
radiation sources.
•
Make sure that you have connected the supplied FM
antenna.
•
For optimal reception, fully extend and adjust the
position of the antenna.
Tune to a radio station
1
Press FM to select the tuner source.
2
Press and hold / for 3 seconds.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
• Press / repeatedly until you find
optimal reception.
Store FM radio stations
automatically
Note
•
You can store a maximum of 20 preset radio stations
(FM).
1
In tuner mode, press CLOCKSCAN
for more than two seconds to activate
automatic programming.
»
[AUTO] is displayed.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The first programmed radio station is
broadcast automatically.
2
press / to select a preset station.
Store FM radio stations
manually
1
Tune to an FM radio station.
2
Press PROG to activate programming
mode.
»
[PROG] (program) blinks.
3
Press ALBUM/PRESET / repeatedly
to select a radio frequency.
4
Press PROG again to confirm.
»
The frequency of the preset station is
displayed.
5
Repeat the above steps to store more FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
• In FM mode, press / to select a preset
radio station.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
• In FM tuner mode, press
to switch
between mono and stereo broadcast.
»
[STEREO] (Stereo) is displayed when
the radio station is stereo broadcast.