Samsung 5400 Manuel D’Utilisation

Handbook

8 Press the Yes

§ key. The display shows

BROADCAST/MEMORY TX

9 Press the Yes

§ key.

The display shows

BROADCAST/MEMORY TX.

Press the Yes

§ key.

10 Select a location. Refer to the instructions below.

•

To select a One Touch key, press the One Touch key
(lift the main One Touch keypad to access One Touch
keys 16–30).

•

To select an Auto Dial number, press the Auto Dial key,
then enter the two-digit Auto Dial number on the
numeric keypad.

•

To select a number dialed on the numeric keypad, dial
as you would on a normal telephone.

•

To select a group, use the numeric keypad and press the
# key. Then, enter the number of the group you want to
use.

11 Press the Yes

§ key to confirm your selection. The display

shows

SELECT LOCATION(S).

12 To continue selecting locations, repeat Steps 11 and 12 as

often as necessary.

13 When you are finished selecting locations, press the No

key [when the

SELECT LOCATION(S) message is

displayed].

14 If you have selected multiple locations, the unit will ask

you if you want to confirm your selections with a printed
report before proceeding.

•

If you do, press the Yes

§ key. After the report is

printed, the display shows BEGIN SCANNING?

•

If you want to make corrections, press the No

and go back to Step 9.

•

To remove a location, select the location in the same
way, but press the No

transmission.