Sony DSC-F828 Manuel D’Utilisation
78
–
If you perform any invalid operation, the
indicator flashes, and the “Night shot”
indicator lights for about five seconds.
indicator lights for about five seconds.
•
While using the NightShot function, you cannot
use the following functions:
use the following functions:
–
AE LOCK
–
Shooting with hologram AF
–
Shooting with the flash
–
Selecting the color reproduction mode
•
While the camera is in Multi Burst mode, the
NightShot function cannot be used.
NightShot function cannot be used.
•
When [Pop-up Flash] is set to [Manual] in the
SET UP settings, pop up the flash emitter using
the
SET UP settings, pop up the flash emitter using
the
OPEN (FLASH) switch.
•
When attaching the supplied lens hood, infrared
ray may be blocked.
ray may be blocked.
•
Do not use the NightShot function in bright
places (e.g. outdoors in the daytime). This may
cause your camera to malfunction.
places (e.g. outdoors in the daytime). This may
cause your camera to malfunction.
NightFraming
The NightFraming function enables you to
check a subject even at night and then
record with natural colors using the flash.
check a subject even at night and then
record with natural colors using the flash.
a
Set the mode dial to
or P.
b
Press and hold NIGHTSHOT/
NIGHTFRAMING and select
NIGHTFRAMING and select
(Night framing) with the
command dial.
The flash emitter pops up and the
and “Night framing” indicators light
for about five seconds.
for about five seconds.
c
Press and hold the shutter
button halfway down.
button halfway down.
The focus is automatically adjusted.
d
Press the shutter button fully
down.
down.
The shutter sounds, the flash strobes
and the image is recorded.
and the image is recorded.
To cancel the NightFraming function
In Step 2, select [Off].
•
While using the NightFraming function:
–
The white balance is set to Auto.
–
The metering mode is set to multi-pattern
metering.
metering.
–
The AF range finder frame is not displayed.
The centrally-located subject has priority to
focus on.
The centrally-located subject has priority to
focus on.
–
The AE lock cannot be used.
–
If you perform any invalid operation while
using the NightFraming function, the
using the NightFraming function, the
indicator flashes and the “Night framing”
indicator lights for about five seconds.
indicator lights for about five seconds.
•
When [Pop-up Flash] is set to [Manual] in the
SET UP settings, pop up the flash emitter using
the
SET UP settings, pop up the flash emitter using
the
OPEN (FLASH) switch.
•
When attaching the supplied lens hood, flash
light and infrared ray may be blocked.
light and infrared ray may be blocked.
•
When you press the shutter button halfway
down, you will hear a sound, but this is not the
sound of the shutter releasing. The image is not
recorded yet.
down, you will hear a sound, but this is not the
sound of the shutter releasing. The image is not
recorded yet.
•
When [Hologram AF] is set to [Off], you may
not get a clear focus. Setting [Hologram AF] to
[Auto] is recommended (page 35).
not get a clear focus. Setting [Hologram AF] to
[Auto] is recommended (page 35).
•
When using the following functions, you
cannot use the NightFraming function.
cannot use the NightFraming function.
–
Manual focus
–
Exposure Bracket
–
Burst
–
Multi Burst
8M
4
101
"Night framing"
80
min
MAF