Haier HR-126WL Manuel D’Utilisation

Page de 10
Cautions 
Disposal of the old appliance 
Before disposing an old appliance that goes 
out of use, please make sure it’s inoperative 
and safe. Unplug the appliance and remove 
or destroy all of the springs, latches, or 
boltlocks in order to avoid the risk of child 
entrapment. 
It must be noticed that refrigeration system 
contains insulating gases and refrigerants, 
which require specialized waste disposal. 
The  valuable  materials  contained in  a 
refrigerator can be recycled. Contact your 
local  waste  disposal  center  for  proper 
disposal of an old appliance and contact 
your local authority or your dealer if you 
have any question. Please ensure that the 
pipework of your refrigerator does not get 
damaged prior to being picked up by the 
relevant  waste  disposal  center,  and 
contribute  to  environmental  awareness 
by  insisting on an appropriate, anti-pollution 
method of disposal. 
Disposal  of  the  packaging  of  your 
new appliance 
All the packaging materials employed in the 
package  of  your  new  appliance  may be 
disposed without any danger to the 
environment. 
The cardboard box may be broken or cut 
into smaller pieces and given to a waste 
paper disposal service. The wrapping foil 
is made of polyethylene and the polyethylene 
pads and stuffing contain no fluorochloric 
hydrocarbon. 
All these valuable materials may be taken 
to a waste collecting center and used again 
after adequate recycling. 
Consult your local authorities for the name 
and address of the waste materials collecting 
centers  and waste paper disposal services 
nearest to your house. 
Safety Instructions and Warnings 
Before  starting  the  appliance,  read  the 
information given in the User ’s Guide 
carefully. The User’s Guide contains very 
important observations relating to the 
assembly, operation and maintenance of 
the appliance. 
Keep the User’s Guide in a safe place and 
remember to hand it over to the subsequent 
owner, if you ever sell the appliance. 
The  manufacturer  does  not  accept 
responsibility for any damages that may 
arise  due  to  non-observation  of  the 
following instruction.
 Damaged appliances are not to be put 
into operation. In case of doubt, consult your 
supplier.
 Connection  and  installation  of  the 
appliance  are  to  be  carried  out  in  strict 
compliance with the relative instructions set 
forth in the User’s Guide. 
.1.