Heatcraft Refrigeration Products PRO3 Manuel D’Utilisation

PRO

3

 Side Mount Packaged Refrigeration System Installation and Operations Manual, May 008 

 

 3

Leave this area unobstructed

Leave these areas 

unobstructed

24"

TOP VIEW

4.00

18"

18"

24"

36"

8"

1.  Each shipment should be carefully checked against the bill 

of lading.

.  The shipping receipt should not be signed until all items listed 

on the bill of lading have been accounted for.

3.  Check packaging for signs of damage.
4.  Any shortage or damages should be immediately reported to 

the delivering carrier.

5.  Damaged material becomes the delivering carrier’s 

responsibility, and should not be returned to the manufacturer 
unless prior approval is given to do so.

6.  All units are shipped on heavy skids and enclosed in open 

crating. Generally, it is advisable to bring the unit as close to  
its final location as possible before removing crating.

7.  When unpacking the system, care should be taken to  

prevent damage.

8.  Avoid removing the shipping base until the unit has been 

moved to the final destination.

1.  Ensure that the structural integrity of the box can withstand 

the weight of the side-mounted equipment.

.  The air pattern must cover the entire room
3.  Location of aisles, racks, etc. must be known 

4.  For space requirements,

Provide adequate access space (minimum 36") on the right side of 
the unit for electric box clearance. The front of the unit should have 
a minimum of 4" clearance for compressor and fan motor service. 
The left side of the unit should be a minimum of 8" clearance.

The front of the evaporator should have no obstructions since this 
is  the  leaving  airside  of  the  evaporator.  There  should  also  be  no 
obstructions under the evaporator. A minimum of 8" clearance should 
be held on each side of the evaporator for drain pan removal.