SMC Networks SMC6752AL2 Manuel D’Utilisation

2-6

2. Type “configure” and press <Enter>. 

3. Type “username guest password 0 password,” for the Normal Exec 

level, where password is your new password. Press <Enter>. 

4. Type “username admin password 0 password,” for the Privileged Exec 

level, where password is your new password. Press <Enter>.

Note:  ‘0’ specifies the password in plain text, ‘7’ specifies the 

password in encrypted form.  

You must establish IP address information for the switch to obtain 
management access through the network. This can be done in either of the 
following ways:

Manual — You have to input the information, including IP address and 
subnet mask. If your management station is not in the same IP subnet as 
the switch, you will also need to specify the default gateway router.

Dynamic — The switch sends IP configuration requests to BOOTP or 
DHCP address allocation servers on the network. 

Username: admin
Password:

   CLI session with the SMC6752AL2 is opened.
   To end the CLI session, enter [Exit].

Console#configure
Console(config)#username guest password 0 [password]
Console(config)#username admin password 0 [password]
Console(config)#