Adder Technology ADD0026/6 Manuel D’Utilisation
SmartView
Installation and Use
Page 28
RS232 serial mice - these require a special converter to connect the RS232 lines
present on the SmartView mouse ports to the RS232 port on a PC. The wiring is
identical to that used by Microsoft for their autosensing mouse adapter and is shown
below:
present on the SmartView mouse ports to the RS232 port on a PC. The wiring is
identical to that used by Microsoft for their autosensing mouse adapter and is shown
below:
Cables should be no longer than 30 metres.
A3. Expansion port pin assignments (SmartView 4 port only)
The 15 way D connector located on the front of all 4 port SmartViews provides
connections for the remote control module and allows an external RS232 device to
control the SmartView. See section 3.5 for more details.
connections for the remote control module and allows an external RS232 device to
control the SmartView. See section 3.5 for more details.
Pin 9 = GND
Pin 11 = RXD
Other pins to be left unconnected
Pin 11 = RXD
Other pins to be left unconnected