Eaton Electrical 9130 Manuel D’Utilisation
Eaton
®
9130 UPS (700–3000 VA) User's Guide
S
164201718 Rev 2
www.powerware.com
61
Chapter 6
UPS Maintenance
This section explains how to:
S
Care for the UPS and batteries
S
Replace the UPS internal batteries and Extended Battery Modules
(EBMs)
(EBMs)
S
Test new batteries
S
Recycle used batteries or UPS
S
Update the UPS firmware
UPS and Battery Care
For the best preventive maintenance, keep the area around the UPS
clean and dust‐free. If the atmosphere is very dusty, clean the outside of
the system with a vacuum cleaner.
clean and dust‐free. If the atmosphere is very dusty, clean the outside of
the system with a vacuum cleaner.
For full battery life, keep the UPS at an ambient temperature of
25°C (77°F).
25°C (77°F).
NOTE If the UPS requires any type of transportation, verify that the UPS is unplugged and
turned off and then disconnect the UPS internal battery connector (see Figure 24 on page 64
for rackmount models or Figure 26 on page 67 for tower models).
turned off and then disconnect the UPS internal battery connector (see Figure 24 on page 64
for rackmount models or Figure 26 on page 67 for tower models).
NOTE The batteries in the UPS are rated for a 3–5 year service life. The length of service
life varies, depending on the frequency of usage and ambient temperature. Batteries used
beyond expected service life will often have severely reduced runtimes. Replace batteries at
least every 5 years to keep units running at peak efficiency.
life varies, depending on the frequency of usage and ambient temperature. Batteries used
beyond expected service life will often have severely reduced runtimes. Replace batteries at
least every 5 years to keep units running at peak efficiency.