RAD Data comm IPmux-11 Manuel D’Utilisation

Chapter 5  Configuring IPmux-11 for a Typical Application 

Installation and Operation Manual 

5-2 

Configuring IPmux-11 Units

 

IPmux-11 Ver. 2.00 

IPmux-11 (A) 

•  Transmit clock source: 

adaptive 

•  Line type: Framed G.704 

CRC-4 enabled 

•  CAS: disabled 

Host IP address: 
192.168.10.2 

Bundle 1 
Timeslots in 

bundle: 1–10 

Bundle 1 of IPmux-11 (B) 

IPmux-11 (B) 

•  Transmit clock source: 

Loopback 

•  Line type: Framed G.704 

CRC-4 enabled 

•  CAS: disabled 

Host IP address: 
192.168.10.1 

Bundle 1 
Timeslots in 

bundle: 1–10 

Bundle 1 of IPmux-11 (A) 

This section explains how to configure IPmux-11 units. The configuration 
procedure is similar for both units, except for defining different host IP addresses, 
different clocking modes and different destination IP address for the bundle 
connection. Refer to 

 for explanation of how to select management 

options and save the changes.  

 

To configure the host IP parameters: 
•  Display the Host IP menu (Configuration > System > Host IP), and configure 

the IP address and mask of the host: 
1.  Disable the DHCP mechanism 
2.  Save the changes 
3.  Set the IPmux-11 (A) host IP address – 192.168.10.2  
4.  Set the IPmux-11 (B) host IP address – 192.168.10.1 
5.  Save the changes. 

Configuration>System>Host IP 

3. Default gateway                      ... (0.0.0.0) 

4. DHCP 

 

                (Disable) 

5. DHCP Status                          > 

 
> 

 
Please select item <1 to 5> 
ESC-prev.menu; !-main menu; &-exit                                   1 Mngr/s