Avocent EMS1000P Manuel D’Utilisation
10
Emerge EMS Installer/User Guide
Chapter 2: Installation
11
Emerge EMS1000MP-T models
1. Attach the connector of the first link cable to the socket labeled
1. Attach the connector of the first link cable to the socket labeled
L1 OUT
on the Emerge EMS1000MP-T transmitter. There should be a click
when the cable is fully inserted and locked in place.
2. Attach the connectors of the remaining link cables to
the sockets labeled
L2 OUT
to
L4 OUT
, as required.
In all cases, there should be a click when
the cable is fully inserted and locked in
place.
Figure 2.8: Connecting up to four link cables to the EMS1000MP-T transmitter unit