Avocent EMS1000P Manuel D’Utilisation

Emerge EMS Installer/User Guide

 

Chapter 2: Installation

To Connect Cascaded Transmitters
1.  Attach a video cable of suitable type and length (fully shielded with 15 way male D-type 

connectors at both ends – 6 feet or less) to the socket labeled 

 on the primary 

Emerge EMS transmitter.

2.  Attach the other end of the video cable to the socket labeled 

 on 

the secondary Emerge EMS transmitter.

3.  Attach a stereo audio cable (shielded with three way 3.5mm 

jack plugs at both ends) to the socket labeled 

 on 

the primary Emerge EMS transmitter.

4.  Attach the other end of the stereo audio cable 

to the socket labeled 

 on the secondary 

Emerge EMS transmitter.

5.  Repeat such cascade links until the 

required number of transmitters 

(up to a maximum of four) 

are present. Connect the 

remaining signal and power 

cables to the added 

transmitters (and their 

respective receivers) 

as discussed earlier 

within this chapter. 

Figure 2.18: Connecting the audio/visual outputs of 

one transmitter to the inputs of the next