Axis Communications 241S Manuel D’Utilisation
12
AXIS 241Q/241S - Installation
Set the IP address manually
If the AXIS 241Q/241S does not appear in the window, click the Refresh button to try
again. If it still does not appear, set the IP address manually.
1. Acquire an unused IP address. AXIS IP Utility detects the subnet your computer is
connected to. The AXIS 241Q/241S must be installed on the same network segment.
2. Click the button “Set IP address using serial number” and enter the serial number and
IP address for the AXIS 241Q/241S.
3. Click the Set IP button and then restart the AXIS 241Q/241S (within 2 minutes).
4. Click View Home Page to access the AXIS 241Q/241S Web pages.
5. Enter a password for the root user (administrator).
6. If required, accept the installation of AMC onto your workstation.
4. Click View Home Page to access the AXIS 241Q/241S Web pages.
5. Enter a password for the root user (administrator).
6. If required, accept the installation of AMC onto your workstation.
Notes:
• AXIS IP Utility can also be used to change the IP address of a previously discovered Axis device.
• AMC (AXIS Media Control) must be installed to view live video in Microsoft Internet Explorer. If your
• AMC (AXIS Media Control) must be installed to view live video in Microsoft Internet Explorer. If your
working environment restricts additional software components, you can configure your AXIS 241Q/241S to
use a Java applet for updating the images. See the help file Live View Config > Layout > Default Viewer for
Internet Explorer, or use another supported Web browser, see Technical Specifications, on page 57.
use a Java applet for updating the images. See the help file Live View Config > Layout > Default Viewer for
Internet Explorer, or use another supported Web browser, see Technical Specifications, on page 57.
7. The installation is now complete. Proceed to Using the video server, on page 16.
UPnP™
UPnP
functionality is enabled by default in the AXIS 241Q/241S. If also enabled on your
computer (Windows ME or XP), the video server will automatically be detected and a new
icon will be added to “My Network Places.” Click this icon to access the AXIS 241Q/241S.
Note:
Note:
To install the UPnP service on your computer, open the Control Panel from the Start Menu and select
Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services
section. Click Details and then select
Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services
section. Click Details and then select
UPnP as the service to add.
The serial number (S/N) is located on the label on the underside of the AXIS 241Q/241S
UPnP
TM
is a certification mark of the UPnP
TM
Implementers Corporation.