Axis Communications 241S Manuel D’Utilisation

If the AXIS 241Q/241S has been customized, the buttons and other items described below 

will be displayed accordingly on the Live View page. The following provides an overview 

of each button:

To resize the displayed image, click the View Size buttons: half-size 

(x

1

/2

), full-size (x1), x2 or x4. This will not change the resolution of the 

image (not available in Sequence Mode).

 

The Video Format drop-down list allows the video format on the Live 

View page to be temporarily changed. 

The Output buttons control an output directly from the Live View page. These 

buttons are configured under Setup > Live View Config > Layout.

Pulse - click this button to activate the port for a defined period of time, e.g. to 

switch on a light for 20 seconds.

 

Active/Inactive - click these buttons to manually start and stop a connected 

device, e.g. switch a light on/off.

These buttons start/stop the Sequence Mode. This mode is created in Setup > 

Live View Config > Sequence mode and automatically displays the view 

from 2 or more video sources at set intervals.

From the Source list, select the desired video image(s). The list can 

contain internal video sources, external video sources, or the Quad 

Stream view (AXIS 241Q only). The Quad Stream option displays all 

four video images in one stream. 

The Action buttons trigger an event directly from the Live View page. These 

buttons are configured under Setup > Live View Config > Layout. Click these 

buttons to manually start and stop events.

Use the Snapshot button to capture a snapshot of the image currently being 

displayed in the window. Right-click on the image to save it in on your 

computer.

The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet 

Explorer only and displays the following buttons:

The Play/Stop buttons start and stop the live video stream.