Axis Communications 241S Manuel D’Utilisation

Page de 95
AXIS COMMUNICATIONS
<Product Name> Quick User’s Guide
 
About This Document
This manual is intended for administrators and users of the 
AXIS 241Q/241S Video Server, and is applicable for 
software release 4.20. It includes instructions for installing, 
using and managing the AXIS 241Q/241S on your network. 
Previous experience of networking will be of use when 
installing and using this product. Some knowledge of UNIX 
or Linux-based systems would also be beneficial, for 
developing shell scripts and applications. Later versions of 
this document will be posted to the Axis Website, as 
required. See also the product’s online help, available via 
the Web-based interface.
Safety Notices Used In This Manual
Caution! - Indicates a potential hazard that can damage the 
product.
Important! - Indicates a hazard that can seriously impair 
operation.
 
Do not proceed beyond any of the above notices until you 
have fully understood the implications.
Intellectual Property Rights
Axis AB has intellectual property rights relating to 
technology embodied in the product described in this 
document. In particular, and without limitation, these 
intellectual property rights may include one or more of the 
patents listed at http://www.axis.com/patent.htm and one 
or more additional patents or pending patent applications 
in the US and other countries.
This product contains licensed third-party software. See the 
menu item “About” in the product’s user interface for more 
information.
Legal Considerations
Camera surveillance can be prohibited by laws that vary 
from country to country. Check the laws in your local 
region before using this product for surveillance purposes. 
This product includes one (1) MPEG-4 decoder license. To 
purchase further licenses, contact your reseller.
Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or 
more of the following measures: Re-orient or relocate the 
receiving antenna. Increase the separation between the 
equipment and receiver. Connect the equipment to an 
outlet on a different circuit to the receiver. Consult your 
dealer or an experienced radio/TV technician for help. 
Shielded (STP) network cables must be used with this unit 
to ensure compliance with EMC standards.
USA - 
This equipment has been tested and found to 
comply with the limits for a Class B computing device 
pursuant to Subpart B of Part 15 of FCC rules, which are 
designed to provide reasonable protection against such 
interference when operated in a commercial environment. 
Operation of this equipment in a residential area is likely to 
cause interference, in which case the user at his/her own 
expense will be required to take whatever measures may be 
required to correct the interference. 
Europe  - 
 
This digital equipment fulfills the 
requirements for radiated emission according to limit B of 
EN55022/1998, and the requirements for immunity according 
to EN55024/1998 residential, commercial, and light industry.
Liability
Every care has been taken in the preparation of this manual; 
Please inform your local Axis office of any inaccuracies or 
omissions. Axis Communications AB cannot be held responsible 
for any technical or typographical errors and reserves the right 
to make changes to the product and manuals without prior 
notice. Axis Communications AB makes no warranty of any 
kind with regard to the material contained within this 
document, including, but not limited to, the implied warranties 
of merchantability and fitness for a particular purpose. Axis 
Communications AB shall not be liable nor responsible for 
incidental or consequential damages in connection with the 
furnishing, performance or use of this material.
Trademark Acknowledgments
Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN 
Manager, Linux, Macintosh, Microsoft, Mozilla, Netscape 
Navigator, OS/2, UNIX, Windows, WWW are registered 
trademarks of the respective holders. QuickTime™ is a 
trademark of Apple Computer, Inc., registered in the U.S. and 
other countries. Java and all Java-based trademarks and logos 
are trademarks or registered trademarks of Sun Microsystems, 
Inc. in the United States and other countries. Axis 
Communications AB is independent of Sun Microsystems Inc. 
UPnP™ is a certification mark of the UPnP™ Implementers 
Corporation.
Support Services
Should you require any technical assistance, please contact 
your Axis reseller. If your questions cannot be answered 
immediately, your reseller will forward your queries through 
the appropriate channels to ensure a rapid response. If you are 
connected to the Internet, you can:
• download user documentation and firmware updates
• find answers to resolved problems in the FAQ database. 
Search by product, category, or phrases
• report problems to Axis support staff by logging in to your 
private support area
• visit the Axis Support Web at www.axis.com/techsup/
Safety Notice - Battery Replacement
The AXIS 241Q/241S uses a 3.0V CR2032 Lithium battery as 
the power supply for its internal real-time clock (RTC). This 
battery will, under normal conditions, last for a minimum of 5 
years. Low battery power affects the operation of the RTC, 
causing it to reset at every power-up. A log message will appear 
when battery replacement is required.
The battery should not be replaced unless required!
If the battery does need replacing, observe the following points:
Caution!
• Danger of Explosion if battery is incorrectly replaced
• Replace only with the same or equivalent battery, as 
   recommended by the manufacturer.
• Dispose of used batteries according to the manufacturer's 
   instructions.
AXIS 241Q/241S User’s Manual
 
Revision 2.1
Dated: March 2005
 
Part No: 24241
Copyright© Axis Communications AB, 2004-2005