Axis Communications 241S Manuel D’Utilisation

DNS (Domain Name Service) provides the translation of host names to IP addresses on your 

network.

Obtain DNS server address via DHCP - automatically use the DNS server settings provided 

by the DHCP server. Click the View button to see the current settings.

Use the following DNS server address - enter the desired DNS server by specifying the 

following:

Domain name - enter the domain(s) to search for the host name used by the AXIS 

241Q/241S. Multiple domains can be separated by semicolons (;). The host name is always 

the first part of a Fully Qualified Domain Name, e.g. myserver is the host name in the Fully 

Qualified Domain Name myserver.mycompany.com where mycompany.com is the 

Domain name.

DNS servers - enter the IP addresses of the primary and secondary DNS servers.

The AXIS 241Q/241S can be accessed using a host name, instead of an IP address. The host 

name is usually the same as the assigned DNS Name.

For more information, please see the online help

This is enabled by default and assigns the AXIS 241Q/241S an additional IP address for use 

with UPnP™. The AXIS 241Q/241S can have both a Link-Local IP and a 

static/DHCP-supplied IP address at the same time - these will not affect each other. 

The default HTTP port number (80) can be changed to any port within the range 

1024-65535. This is useful for e.g. simple port mapping.

The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP 

port number to use. The default setting is 554.