Hitachi VM-H835LA Manuel D’Utilisation

Specifications 

 

67

start recording. 
• Do not remove the clock battery after recording. 
• Do not eject the recorded cassette. Leave it in the 
camcorder. 

BATTERY CONDITION 

 Symptom 

 Check Point & Correction 

 The (

) indication in the electronic 

viewfinder flashes to indicate battery is 
discharged. 

 • Try another battery or charge the battery. 

 The battery level indicator (

) appears 

differently on the LCD monitor and in 
the viewfinder. 

 • This does not indicate a fault; it is because the 
power consumed by the LCD monitor and viewfinder 
is different. 

NO OPERATION IS ACCEPTED 

 Symptom 

 Check Point & Correction 

 Power is turned on, but no button 
operations are accepted. 

 • Remove the power source and the date/title 
battery. And after about one minute, the display in 
the viewfinder or LCD monitor will be reset. Then set 
the information again. 

 

TAPE DISPLAY 

Symptom 

Check Point & Correction 

"TAPE" appears in the viewfinder or 
LCD monitor. 

• Have you moved the camcorder or cassette from a 
cold place to a warm place so that its temperature 
changed abruptly? If the temperature has changed, 
remove the cassette and set the CAM/OFF/VIDEO 
switch to OFF, then wait for about one hour. 
• Remove the cassette and then try to reinsert: 
remove it several times. If the indication is still 
shown in the viewfinder, use a cleaning tape to 
clean the heads and replace the cassette. 

 

General Specifications 

Power requirements  

7.2V DC 

Power consumption  

4.4W (when recording/LCD monitor OFF) 

    5.5W 

(when 

recording/LCD 

monitor 

ON) 

Dimensions   

 

4-1/8" W x 4-1/2" H x 9-7/16" D (104mm x 115mm x 239mm) 

Weight 

 

 

 

2.03 lbs (approx. 920g) without battery pack or 

cassette 
Operating temperature 

 

32°F ~ 104°F (0°C ~ 40°C)