Fujifilm AX330 Manuel D’Utilisation

80

eIf you think the camera is faulty, check the following once more.

No power.

Nothing happens when
I press the “Playback”
button.

Power cuts out during
operation.

Batteries run out
quickly.

No photograph is taken
when the Shutter
button is pressed.

Can’t use the flash.

The playback image is
too dark even though
the flash was used.

The image is blurred.

There is speckling on
the image.

Can’t format the xD-
Picture Card.

i The batteries have run out.
i The batteries are loaded backwards.

i The battery cover is not closed

properly.

i The AC power adapter plug has come

out of the power outlet.

Lens cover is opened.

The batteries run out.

i You are using the camera in extremely

cold conditions.

i The terminals are soiled.

i The batteries get un-rechargeable.

i No xD-Picture Card is inserted.
i The xD-Picture Card is fully recorded.

i The xD-Picture Card is not formatted.
i The  xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.
i The Auto power off function has

switched the camera off.

i The batteries run out.

i The flash is set to Suppressed Flash

mode.

i You pressed the Shutter button while

the flash was charging.

i The batteries run out.

i The Subject is too far away.

i Your finger was covering the flash.

i The lens is dirty.
i The photographed subject was too

dark.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without

selecting Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The shot was taken with a slow shutter
speed (long exposure) in a high-
temperature environment.

The  xD-Picture Card contact area is
soiled.

i Load new or fully charged batteries.
i Load the batteries in the correct

direction.

i Close the battery cover correctly.

i Plug the adapter back in.

Close the lens cover.

Load new or fully charged batteries.

i Put the batteries in your pocket or

another warm place to heat them and
then load them into the camera just
before you take a picture.

i Wipe the battery terminals with a

clean, dry cloth.

i Load new batteries.

i Insert an xD-Picture Card.
i Insert a new xD-Picture Card or erase

some unwanted frames.

i Format the xD-Picture Card.
i Wipe the xD-Picture Card contact

area with a clean dry cloth.

i Insert a new xD-Picture Card.
i Turn the camera on.

i Load new or fully charged batteries.

i Set the Flash mode to Auto, Red-eye

Reduction or Forced Flash (The flash
cannot be used in some modes).

i Wait until the flash has finished

charging before pressing the Shutter
button.

i Load new or fully charged batteries.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.
i Try standing approx. 2 m (6.6 ft.) from

your subject to take the picture.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

This is a characteristic of CCDs and
does not indicate a camera fault.

Wipe the xD-Picture Card contact area
with a clean dry cloth.